A Step-by-Step Guide to Changing a Flat Tire Safely

A flat tire can strike at any moment, leaving you stranded on the side of the road and disrupting your plans. However, learning how to change a flat tire can be a lifesaver in such situations.



At Deals on tires, we understand the importance of being prepared for the unexpected. In this blog, we'll provide you with a comprehensive step-by-step guide to changing a flat tire safely. While we encourage DIY efforts, we're always here to lend a helping hand if you need us. Remember, when you can't do it yourself, you can rely on Deals on tires for quick and reliable assistance.

Step 1: Find a Safe Location
When you notice a flat tire while driving, don't panic. Gradually reduce your speed and safely pull over to the side of the road. Look for a flat, level surface away from traffic, and engage your hazard lights to alert other drivers of your presence. 

Step 2: Gather the Necessary Tools
Before proceeding, ensure you have the following tools ready, usually found in your vehicle's trunk:
- Spare tire
- Jack
- Lug wrench
- Vehicle owner's manual

Step 3: Loosen the Lug Nuts
Use the lug wrench to loosen the lug nuts on the flat tire, but do not remove them completely just yet. This is easier when the weight of the vehicle is still on the tire, preventing it from rotating as you work. 

Step 4: Lift the Vehicle with the Jack
Position the jack in the recommended jacking point (refer to your owner's manual) and carefully lift the vehicle until the flat tire is off the ground. Make sure the vehicle is stable on the jack before proceeding.

Step 5: Remove the Flat Tire
Now, you can safely remove the loosened lug nuts and take off the flat tire. Place the lug nuts in a secure spot to avoid losing them.

Step 6: Install the Spare Tire
Align the spare tire with the wheel bolts and gently push it onto the wheel hub. Hand-tighten the lug nuts to hold the tire in place.

Step 7: Lower the Vehicle and Tighten Lug Nuts
Carefully lower the vehicle back to the ground using the jack. Once it's fully supported by the ground, use the lug wrench to tighten the lug nuts in a star pattern. This ensures even tightening and prevents wheel wobbling.

Step 8: Double-Check the Lug Nuts
After tightening, go around the lug nuts again to double-check their tightness. It's crucial to ensure they are securely fastened to avoid any mishaps while driving.

If You Can't Do It Yourself, Call Us!
At Deals on tires, we understand that changing a flat tire can be challenging for some, especially in unfamiliar or stressful situations. That's why our team of skilled professionals is just a phone call away. If you find yourself unable to change your flat tire or prefer leaving it to the experts, don't hesitate to call us for prompt and reliable assistance. Our mobile tire service team will quickly come to your aid, ensuring you get back on the road safely and with minimum disruption to your day. 

Knowing how to change a flat tire is an essential skill for every driver. With our step-by-step guide and the assurance of Deals on tires’ reliable support, you can tackle flat tires with confidence. Remember, whether you decide to DIY or seek our assistance, dealsontires.com is always here to keep you rolling smoothly and safely. Drive stress-free, knowing that your tire needs are taken care of by a trusted partner – Deals on tires.